Plumbing & Heating in Brixton
Leaks, taps, radiators and heating repairs — sorted quickly by an experienced team.
- Covering SW2, SW9
- Local South London team
- Local South London team
- Free, no-obligation quotes
- Covering SW2, SW9
- One team, every trade
Two very different kinds of plumbing sit side by side in Brixton. The long Victorian terraces climbing Brixton Hill and Tulse Hill, mostly carved into flats, run on ageing pipework and shared soil stacks; the purpose-built blocks and estates around the town centre and Angell Town have more accessible plumbing but tired communal heating and valves. Between the two sit the converted flats around Loughborough Junction, many reworked more than once over the years. We cover all of it in SW2 and SW9, handling leaks and burst pipes, dripping taps, running toilets, blocked wastes and cold or leaking radiators.
Speed matters with a leak, so the first thing we'll often do over the phone is talk you through turning the stopcock off to limit the damage. From there we attend, find the actual source rather than the symptom, and give you a price before any work starts. We carry the common parts, so many drips, running toilets and worn valves are fixed the same visit; larger jobs like a bathroom re-plumb off Coldharbour Lane or a heating overhaul are booked in around you. Gas and boiler work is always carried out by a Gas Safe registered engineer.
A lot of Brixton property is rented, so we do plenty of reactive and between-tenancy work for landlords and agents alongside jobs for owner-occupiers — around Acre Lane, Effra Road, Loughborough Junction and the streets off Brixton Road towards Brockwell Park. Between tenancies it's usually the quick list: a leaking valve, a running toilet, a slow waste, cleared fast so the flat is ready for the next occupant. Bathroom and kitchen plumbing is a steady part of it too — new taps, valves and wastes, or an appliance connected so it stops leaking behind the units. We plan visits around the busy town centre and its permit zones, and for flats with shared entrances we arrange access with the tenant, a neighbour or the managing agent beforehand so the work runs smoothly.
Why Brixton chooses 247 Property Maintenance
One dependable local team, honest pricing and tidy work — the things that actually matter when someone's coming to your home.
One trusted local team
From a dripping tap to a full refurbishment, a single reliable team handles it — no juggling multiple contractors for your property.
Fast, flexible response
We work around you and aim to get to jobs quickly, with same-day appointments where our schedule allows.
Fair, upfront pricing
Clear, affordable quotes before we start, so there are no surprises when the job is done.
Homeowners & landlords
Trusted for private homes and rental properties alike — reactive repairs, planned maintenance and end-of-tenancy work.
Local to London
Based in South London (SW16) and covering London and the surrounding towns — a local team that knows the area.
Tidy, professional work
Experienced tradespeople who treat your property with respect and leave it clean and finished properly.
Why Brixton homes and landlords rely on us for plumbing and heating
On the hill terraces, age is the recurring theme. Houses along Brixton Hill and Tulse Hill often still have original lead or iron supply pipe buried under floors, and where they've been split into flats the soil stack and rising main usually serve more than one home. A leak in one flat can trace straight back to another, so we follow the whole run and isolate cleanly rather than chasing the nearest damp patch. Swapping old lead for copper or plastic improves both flow and water quality, and giving each flat its own isolation valve means a repair never means draining the building.
The blocks are a different job. On the estates around the town centre and Angell Town, the pipework is generally accessible but the radiator valves and communal heating have aged — sludged systems that never quite warm through, radiators cold at the bottom, and stopcocks that need checking so one flat's repair doesn't trouble the neighbours. Flushing, balancing and swapping tired valves brings the heat back. In the shared houses dotted across SW9, hot water systems get stretched by several tenants at once, so we check capacity and fit sturdy fittings that stand up to constant use. And with so many lets, the between-tenancy list is constant: a dripping tap, a running cistern or a leaking valve put right quickly so the flat is ready for the next tenant.
About plumbing & heating
Plumbing and heating covers the water and heating systems that keep a home working — from leaks, taps and toilets to radiators, valves, hot water and everyday heating repairs.
It is for homeowners, landlords and letting agents who need a fast, reliable fix or a sensible upgrade — anything from an emergency leak to a planned bathroom re-plumb.
Signs you might need plumbing and heating
- A tap, pipe or radiator that drips, leaks or has left a damp patch
- Low water pressure, slow-draining sinks or a toilet that keeps running
- Radiators that stay cold at the bottom or never fully warm through
- Discoloured water, banging pipes or a boiler that keeps losing pressure
- A bathroom or kitchen that needs new taps, valves or re-plumbing
What we cover
- Leaks, burst pipes and dripping taps
- Toilet, cistern and overflow repairs
- Tap, valve and washer replacement
- Radiator repairs, swaps and bleeding
- Sink, basin and waste unblocking
- Outside taps and appliance plumbing
- Bathroom and kitchen plumbing
See our full Plumbing & Heating page for more detail, or everything we do in Brixton.
Our process for plumbing and heating in Brixton
A simple, no-surprises way of working — from your first message to a tidy finish.
- 1
Tell us what's wrong
Call or message with the problem. If it is a leak, we will talk you through turning off the stopcock straight away to limit any damage.
- 2
Find the real source
We attend, trace the problem to its actual source rather than the symptom, and explain clearly what needs doing.
- 3
A price before we start
You get a straightforward quote up front, so you always know the cost before any work begins.
- 4
Repair or install
We carry common parts, so many jobs are finished in a single visit; larger work is booked in at a time that suits you.
- 5
Test and tidy
We test the repair, check for leaks and proper pressure, and leave the area as clean as we found it.
What you get with plumbing and heating from us
Small problems stopped early
A quick repair now avoids water damage, mould and much bigger bills later on.
One visit wherever possible
We carry common parts, so many leaks, taps and valve jobs are fixed the same day.
Gas work done by the book
Any gas or boiler work is carried out only by a Gas Safe registered engineer.
Tidy, respectful work
We protect floors, clear up as we go and leave your home the way we found it.
Honest, up-front pricing
You know the cost before we start, with no call-out surprises at the end.
Plumbing & Heating in Brixton — FAQs
Can you find a leak that seems to come from another flat off Coldharbour Lane?
Yes. Many Brixton conversions share a soil stack and rising main, so a leak often starts in a neighbouring flat and shows up in yours. We trace the whole run to its source and, where access to another flat is needed, arrange it with the tenant, a neighbour or the managing agent first.
Which parts of Brixton do you cover?
We cover Brixton and the surrounding SW2 and SW9 streets, from Brixton Hill and Tulse Hill down to the centre and out towards Loughborough Junction. If you are on the edge of the area, get in touch and we will confirm we can reach you.
Do you help Brixton landlords keep flats let-ready?
Yes. A lot of Brixton property is rented, and we regularly handle reactive repairs and between-tenancy maintenance for landlords and agents — from leaks and decorating to fixing doors, windows and fittings before a new tenant moves in.
How do you handle access and parking around Brixton town centre?
We are used to the busy streets and permit zones around the market and Coldharbour Lane, and we plan our visits and any material drop-offs around them. For flats with shared entrances we can arrange access with the tenant, managing agent or a neighbour beforehand so the work runs smoothly.
Can you help with a leak quickly?
Get in touch as soon as you notice a leak and we will do our best to get to you fast. In the meantime, turning off the stopcock helps limit any water damage.
Do you work on gas boilers?
Any work on gas appliances must be carried out by a Gas Safe registered engineer. Tell us what you need and we will make sure the right qualified engineer attends. (Ask us to confirm current registration details.)
Do you fit bathrooms as well as repair them?
Yes. As well as repairs we handle full bathroom plumbing — see our Kitchen & Bathroom service, or ask for a combined quote.
Can you fix a leak or dripping tap the same day?
Often, yes. We carry common parts and prioritise leaks, so many drips, running toilets and tap problems are sorted in a single visit. Call us and we will give you the soonest slot we can.
Can you repair cold radiators and failing heating?
Yes. We bleed, balance, repair and swap radiators, replace faulty valves and put right common heating faults. If the fault is with a gas boiler itself, a Gas Safe registered engineer handles that part.
Do you handle both emergency repairs and planned upgrades?
Both. We deal with urgent leaks and breakdowns, and we also carry out planned work like re-plumbing a bathroom, upgrading old pipework or improving a tired heating system.
Other services in Brixton
Request a quote for plumbing and heating in Brixton
Send us the details and we will get back to you, usually the same working day.
- Tell us the job — no detail is too small
- We reply with clear, honest pricing
- We book a visit that suits you
Prefer to browse first? See Plumbing & Heating, our Brixton page, or about us.
Book plumbing and heating in Brixton
Tell us what needs doing and we will arrange a visit and a clear quote. Quotes are free and no-obligation.