Appliance Repair & New Installation in Balham
Fitting and connecting home appliances safely, plus help when something stops working.
- Covering SW12
- Local South London team
- Local South London team
- Free, no-obligation quotes
- Covering SW12
- One team, every trade
The terraces around Hildreth Street and Bedford Hill were built long before anyone planned for a dishwasher or a full-size washing machine, and their narrow galley kitchens are where most of our appliance work in Balham happens. We fit and connect washing machines, dishwashers, ovens, hobs, extractor hoods and fridge-freezers across SW12, level them so they run quietly, and take the old unit away when the new one goes in. Any gas hob or cooker is connected by a Gas Safe registered engineer.
The area's popularity with families and young professionals means kitchens get heavy daily use and appliances are replaced often. A slimline dishwasher gets squeezed into a run that was never designed for one, a washer-dryer plumbed into a tight cupboard, an integrated oven swapped without scuffing the units either side. An extractor hood over the hob may need its ducting sorted so it vents outside rather than just recirculating, and a fridge-freezer has to sit in the recess left for it with enough clearance to run efficiently. We fit appliances you have bought yourself, so long as they are on site, positioning, connecting and testing them before we leave, and where a machine leaks, will not drain or trips the electrics, we diagnose the fault first rather than assume it needs replacing.
A large share of the Victorian terraces off Balham High Road are split into upper and lower flats, and a good number are let, so we work for owner-occupiers, landlords and letting agents alike. In the mansion flats near Wandsworth Common a swap often means carrying the old unit out through a shared hallway, which we plan around so nothing gets marked. Whether it is a single fridge-freezer moved into position or a full kitchen kitted out between tenancies, you get one clear price agreed up front and a tidy finish. We cover Balham and the surrounding SW12 streets, from the station out towards Wandsworth Common.
Why Balham chooses 247 Property Maintenance
One dependable local team, honest pricing and tidy work — the things that actually matter when someone's coming to your home.
One trusted local team
From a dripping tap to a full refurbishment, a single reliable team handles it — no juggling multiple contractors for your property.
Fast, flexible response
We work around you and aim to get to jobs quickly, with same-day appointments where our schedule allows.
Fair, upfront pricing
Clear, affordable quotes before we start, so there are no surprises when the job is done.
Homeowners & landlords
Trusted for private homes and rental properties alike — reactive repairs, planned maintenance and end-of-tenancy work.
Local to London
Based in South London (SW16) and covering London and the surrounding towns — a local team that knows the area.
Tidy, professional work
Experienced tradespeople who treat your property with respect and leave it clean and finished properly.
Why Balham homes and landlords rely on us for appliance work
The Nightingale Triangle and the Heaver Estate are full of two-storey terraces converted into upper and lower flats, and that is where the appliance plumbing gets interesting. A lower-flat kitchen usually shares a soil stack with the flat above, so a washing machine or dishwasher waste has to tie in with the right traps and seals and be tested carefully, because a bad connection here reaches a neighbour, not just your own floor. We locate the isolation valves, which conversions love to hide in awkward cupboards, before anything is plumbed in.
Up in the galley and rear-return kitchens along Bedford Hill and Ritherdon Road there is rarely a spare inch, so an integrated appliance has to be slid in level and square behind a matching door front, and the cold feed and waste sometimes need extending to reach it. For the mansion flats near the Common we work to the freeholder's rules and route deliveries and old-unit removal through the communal stairs and lift without marking shared finishes. Whichever it is, we leak-test every connection before we pack up.
For landlords turning a flat around near the station, we can fit and check a whole kitchen's worth of appliances in a single visit, so it is ready for the next tenant without a string of separate call-outs. We take the old units away as part of the job rather than leaving them on the pavement.
About appliance repair & new installation
Appliance repair and installation covers fitting, connecting and testing home appliances — washing machines, dishwashers, ovens, hobs, extractors and fridges — along with repairing faults and safely removing old units.
It is for homeowners, landlords and letting agents who need an appliance fitted safely, an old one taken away, or a fault put right during or between tenancies.
Signs you might need appliance work
- A new appliance that needs fitting, levelling and connecting properly
- A washing machine or dishwasher that leaks, will not drain or trips the electrics
- An oven, hob or cooker that has stopped heating evenly or at all
- An old unit to disconnect and remove before the new one goes in
- A rental property needing appliances checked and working between tenancies
- Earlier DIY connections that need putting right to stop leaks
What we cover
- Washing machine and dishwasher installation
- Oven, hob and cooker fitting
- Extractor and hood installation
- Fridge and freezer positioning
- Disconnection and safe removal of old units
- Plumbing and connection for appliances
See our full Appliance Repair & New Installation page for more detail, or everything we do in Balham.
Our process for appliance work in Balham
A simple, no-surprises way of working — from your first message to a tidy finish.
- 1
Tell us what you need
Give us the make and model, whether it is a new fit or a repair, and any plumbing or electrical connections involved.
- 2
Check the connections
We inspect the water, waste and electrical points before fitting and flag anything that needs upgrading first.
- 3
A price before we start
You get a clear quote up front, so you know the cost before any work begins.
- 4
Fit or repair
We position, level and secure the appliance and connect it, or diagnose the fault and carry out the repair.
- 5
Remove the old unit
Where you need it gone, we disconnect and move the old appliance out of the way.
- 6
Test and demonstrate
We run the appliance, check for leaks and correct operation, and show you it is working before we leave.
What you get with appliance work from us
Safe, correct connections
Water, waste and electrics done properly so the appliance runs reliably.
Fitted level and secure
Units sit flush and stable, which cuts noise, movement and premature wear.
Old appliance taken care of
We disconnect and move the old unit so you are not left dealing with it.
Gas handled properly
Any gas appliance is connected only by a Gas Safe registered engineer.
Fewer leaks and callbacks
Connections are tested before we leave to avoid water damage later on.
Ready between tenancies
A quick, dependable option for landlords turning a property around.
Appliances in Balham — FAQs
Do you cover the whole of Balham?
Yes — we cover Balham and the surrounding SW12 streets, from the area around Balham High Road and the station out towards Wandsworth Common. If you are unsure whether you fall inside our patch, just get in touch.
Can you handle work in period Balham flats and conversions?
Absolutely. Much of Balham is Victorian and Edwardian property split into flats, so we are used to working around shared access, older services and the quirks of conversions — plumbing, decorating, carpentry and general repairs alike.
Do you take on kitchen and bathroom updates in Balham family homes?
Yes. A lot of SW12 stock is period terraces run as busy family homes, and we regularly handle bathroom refreshes, kitchen repairs and the general to-do list that builds up. We agree the price before we start and keep the disruption to a minimum around the household.
Do you install appliances I have bought myself?
Yes. We fit and connect appliances you have purchased — just have them on site and we will install them safely and check they run correctly.
Can you take away my old appliance?
We can disconnect and move old units out of the way as part of the job. Let us know in advance so we can plan for it.
Do you connect appliances that need plumbing or gas?
We handle the plumbing side of appliance installation. Any gas appliance (such as a gas cooker) must be connected by a Gas Safe registered engineer, which we can arrange.
Do you repair appliances as well as install them?
Yes. As well as fitting new appliances, we diagnose and repair common faults — a washing machine that will not drain, a dishwasher that leaks or an oven that has stopped heating. Tell us the make, model and symptom and we will let you know what is involved.
Can you fit integrated or built-in appliances?
Yes. We fit integrated washing machines, dishwashers, fridges and ovens into fitted kitchen units, making sure they sit flush, run level and are properly connected.
Can you help landlords between tenancies?
Yes. We fit, check and repair appliances so a rental property is ready for new tenants, and we can work to the timescales a tenancy turnaround needs.
Other services in Balham
Request a quote for appliance work in Balham
Send us the details and we will get back to you, usually the same working day.
- Tell us the job — no detail is too small
- We reply with clear, honest pricing
- We book a visit that suits you
Prefer to browse first? See Appliance Repair & New Installation, our Balham page, or about us.
Book appliance work in Balham
Tell us what needs doing and we will arrange a visit and a clear quote. Quotes are free and no-obligation.